Your client/browser is unsupported! Please use one of the supported browsers listed here in order of preference:

Otherwise the site may not function as expected. If you have a modern browser it may be OK.

DISMISS

Confirm location
Loading...
Custom features

loading...

  • ...
Predefined features

loading...

Add features from the "Feature report" pane to get details reports.
You will find all saved features here.

Loading...
Select a layer to view its associated legend.
  {{legend.shortName}} {{ legend.shortName }}
 
{{legend.shortName}}
 
Select a layer to view its associated meta data.

The layers in this category (e.g. cartographic text, transport and water) can be overlaid on your map as contextual information.

Phosphorus excess load

This layer represents the load reduction required to achieve at least the NOF (National Objectives Framework) C-band for total phosphorus (TP) levels in critical catchments. The NOF C-band ensures water quality suitable for secondary contact recreation, such as boating and wading, by maintaining moderate nutrient levels.

The map layer visualises the yield proportion, which is calculated by dividing the phosphorus load (expressed in kilograms of total phosphorus per hectare per year (kg TP/ha/yr)) by the catchment area. The yield proportion is used to show the reduction required, expressed as a percentage of the current TP load. For example, if a catchment currently yields a certain amount of phosphorus per hectare per year, this layer shows the proportion of that yield which must be reduced to meet the NOF C-band standard.

Derived from spatial statistical models, the underlying dataset uses compared predicted TP concentrations against the NPSFM (National Policy Statement for Freshwater Management) nutrient target states. The analysis spans a 5-year period from 2016 to 2020, providing average annual loads and focused on reducing excess TP loads to meet the NOF C-band. The data is based on the digital river network used by the River Environment Classification (REC).

N.B. Data has been clipped using LINZ 1:250k lakes, therefore the map will show no data and there will be no reporting over these areas.

Add features of interest to generate a report

To draw a custom area on the map
  • Click multiple times around the map to create a custom area
  • To close your selection area, double click on the map or click on your starting point

Loading...

Loading...

{{ activePane == 'Features' ? sharedState().paneTitle : activePaneTitle() }}

Loading...

Add features of interest to generate a report

To draw a custom area on the map
  • Click multiple times around the map to create a custom area
  • To close your selection area, double click on the map or click on your starting point

Loading...
Custom features

loading...

  • ...
Predefined features

loading...

Add features from the "Feature report" pane to get details reports.
You will find all saved features here.

The layers in this category (e.g. cartographic text, transport and water) can be overlaid on your map as contextual information.

Phosphorus excess load

This layer represents the load reduction required to achieve at least the NOF (National Objectives Framework) C-band for total phosphorus (TP) levels in critical catchments. The NOF C-band ensures water quality suitable for secondary contact recreation, such as boating and wading, by maintaining moderate nutrient levels.

The map layer visualises the yield proportion, which is calculated by dividing the phosphorus load (expressed in kilograms of total phosphorus per hectare per year (kg TP/ha/yr)) by the catchment area. The yield proportion is used to show the reduction required, expressed as a percentage of the current TP load. For example, if a catchment currently yields a certain amount of phosphorus per hectare per year, this layer shows the proportion of that yield which must be reduced to meet the NOF C-band standard.

Derived from spatial statistical models, the underlying dataset uses compared predicted TP concentrations against the NPSFM (National Policy Statement for Freshwater Management) nutrient target states. The analysis spans a 5-year period from 2016 to 2020, providing average annual loads and focused on reducing excess TP loads to meet the NOF C-band. The data is based on the digital river network used by the River Environment Classification (REC).

N.B. Data has been clipped using LINZ 1:250k lakes, therefore the map will show no data and there will be no reporting over these areas.
Select a layer to view its associated legend.
  {{legend.shortName}} {{ legend.shortName }}
 
{{legend.shortName}}
 

Use this facility to create printable PDF maps in A4, A3, A2 and A1 size and in portrait or landscape layout.

The extent of your map is shown by the blue box. Click on the box and drag it around to change the geographic location of your map.

Changing the scale or paper size will affect the amount of detail or the size of the geographic area that will appear on the map.

The maps can include any map title.

please wait while the map is prepared...
loading...
loading...
loading...

Warning: {{ problemLayers[0] }} will not render at {{ selection.scale.name }}.

Warning: at {{ selection.scale.name }} these layers will not render:
  • {{ layerName }}

This map generation process may take a few minutes.

The print request exceeded the maximum supported size due the complexity/amount of geometry in the requested extent. Try printing a smaller area of the map.

3rd party layers will not be included in PDF maps.

DO NOT CLOSE THIS WINDOW before the PDF download window appears. Closing the window will interrupt the creation of your PDF file.

Configure your map

loading layers...

Error. Please try, reloading the page.

Select layers of interest by:
Please select layers to explore {{ numberOfSelectedLayers() }} {{ numberOfSelectedLayers() == 1 ? 'Layer' : 'Layers' }} selected

  The layer will drawn on top of other layers The layer will be drawn in the middle, between the base and context layers. The layer will be a backdrop for other layers.

The layer will turn off when the map is zoomed in past this scale.

The layer will turn off when the map is zoomed out beyond this scale.

{{ settingsItem.layerService.longDescription }}

This layer is styled using the style definition in the source data.

Error

This is an experimental feature.

Our Environment can display third party maps that are served with the Web Map Tile Service (WMTS) protocol or Esri ArcGIS REST API.

WMTS (Web Map Tile Service)

What it is:

"A Web Map Tile Service (WMTS) is a standard protocol for serving pre-rendered georeferenced map tiles over the Internet. The specification was developed and first published by the Open Geospatial Consortium in 2010" (source)

The WMTS standard defines a capabilities document which describes the parameters of a tiled web map. If you have the URL of a capabilities document, Our Environment can try to display your map. For example, click here to use the layers from Manaaki Whenua's Web Map Services.

This feature works best with maps that are in the NZTM projection but we try to re-project on the fly if the maps are in a different projection. The WMTS service obviously needs to provide maps that cover or fall entirely within New Zealand. You will see an error message if the map coverage is outside of New Zealand.

ArcGIS REST API

Our Environment can display some maps hosted by ArcGIS REST API Services. The URL for the service should end with:

  • /MapServer - for example NZ Imagery
  • /MapServer/{a number} e.g. /MapServer/0 /MapServer/1 /MapServer/2 etc.
  • /ImageServer

You can find some compatible maps at:

  • data.govt.nz - when you select a dataset, choose the Esri REST API option, then paste the URL of the resource into the text box above.
  • Living Atlas - when you click on a layer, you will be shown a page with information about the layer. To import this into Our Environment, copy the links that are in the section titled Layers.

Errors encountered

Our Environment encountered some problems while trying to parse the capabilities document. Some layers have been excluded from this list because of the following reasons:
  • The layer doesn't cover New Zealand.
  • The layer is missing the Style attribute that is required by the WMTS standard.
  • The layer is not available in the EPSG:2193 map projection which is used in Our Environment

Layer types

Context - Displayed on top of the map
Science / Content - In the middle, between base and context layers.
Base layer - A backdrop for other layers.

Select one or more layers to continue.

Esri REST API: {{esriServiceName()}}

Description
{{ esriDescription() || "no description supplied" | stripHTML }}
Copyright
{{ esriImageCapabilities.copyrightText }}

Confirm, to save this to your custom layers

Loading tour...